Selling and Design Tools Become an authorized dealer

PVC Sign Installation | Wall Sign Installation

    PVC Sign Installation

The New Kit utilizes their exclusive Slide and Lock System to make pvc sign installation easy, as you work with your client to determine location, heights and possible setbacks.

New Kit's Slide and Lock System locks into the posts without any hardware needed. We manufacture our PVC signage so that the sign face is always centered in the posts and perpendicular.

 
To Install Our PVC Signs:
  1. Dig two holes to the depth required by your local municipality.
  2. Place the sign in the two holes and make sure the sign is level.
  3. Add dry cement.
  4. Tap down the cement, check that the sign is level again.
  5. Your Done! Contact us with any questions.

Looking for PVC Sign Kit Assembly Instructions?  Visit our PVC Sign Assembly Page.

Wall Sign Installation

New Kit wall signs can, at your request, have specially designed keyhole slots placed in the back of the sign, even large signs. A template is made by you from a sheet of paper, the same size as the sign - marking the final position of the screws. The template is then applied to the wall and centered. The screw positions are drilled, installed and set to proper depth and the sign is placed on the screws and slid down to lock it into place. This allows the PVC signage to expand and contract and not bend in the sun and/or temperature changes. It also leaves a beautiful finish on the surface of the sign with no visible screw holes.

Click here to download Wall Sign Installation Instructions complete with photos.